HP XP7 Storage - Manual (Page 65)

Changing SCP time
SCP (state change pending) time is the interval that I/O from the host is suspended. Because SCP
time is shared between Continuous Access Synchronous Z and Compatible FlashCopy, make sure
to take into account the amount of time required by both products when setting the value.
Procedure 10 To specify or change SCP time
1. In the Storage Systems tree, click Replications.
2. From the Actions menu, click Remote Replication > Edit SCP Time.
3. In the Edit SCP Time window, select the CU with the SCP time to be changed, and then click
Change SCP Time.
4. In the Change SCP Time window, enter the new SCP time. The range is from 0 to 518,400
seconds.
5. Click OK.
6. In the Edit SCP Time window, click Finish.
7. In the Confirm window, review the settings and enter a task name in the Task Name box.
8. Click Apply to save your settings in the system.
Changing SCP time 65