HP XP7 Storage User Manual
Page 102
Description
Error code (SSB2)
A request for Cnt Ac-J Paircreate was received. However, the pair could not share the volume
with Continuous Access Synchronous because the Cont Access Journal 3DC & 4x4 Open MF
program product was not installed in the primary system.
3729
A pair cannot be created because the secondary system does not support the combination of
multiple primary and secondary systems.
372B
The volume is inaccessible because the P-VOL is blocked.
372C
The specified volume is used in the system that consists of multiple primary and secondary systems.
Therefore the command was rejected because the delta resync operation cannot be executed.
372D
A request to create or resynchronize a pair in the system that consists of multiple primary and
secondary systems was rejected because the Cont Access Journal 3DC & 4x4 Open MF program
product was not installed in the primary system.
372E
A request for pair creation was rejected because the Cont Access Journal 3DC & 4x4 Open MF
program product was not installed in the primary storage system.
3738
The pair creation failed because the status of a mirror in the journal in which the specified S-VOL
belongs is other than Initial or Stopped.
373E
The delta resync pair was not created because the status of the pair with the delta resync P-VOL
is not PAIR.
3748
The delta resync pair was not created because the status of the pair with the delta resync P-VOL
does not meet the following requirements.
3749
•
The volume is the Cnt Ac-J P-VOL and the pair status is PAIR, PSUS, PSUE, or SSWS.
•
The volume is Cnt Ac-J S-VOL and the pair status is SSWS.
The pair cannot be created because the volume specified as the P-VOL is used as an external
volume for nondisruptive migration and Cache Through is set as the cache mode.
374B
The pair cannot be created because the volume specified as the P-VOL is used as an external
volume for nondisruptive migration and also used as a volume for a Volume Migration pair.
374D
The pair cannot be created because of one of the following:
3752
•
The secondary system's microcode version does not support connection with the primary
system.
•
The specified S-VOL is being used by Continuous Access Synchronous
The pair cannot be created because one of the storage systems does not support the 2DC or
3DC Cnt Ac-J function.
3754
The command was rejected because the specified S-VOL is used as an S-VOL in another mirror,
and the pair status is not in SSWS status.
3755
The pair cannot be created because the secondary storage system does not support the Path Gr.
ID, which was specified as other than 0.
3756
The specified remote storage system does not support global virtualization.
375A
The specified local storage system does not support global virtualization.
375B
The pair cannot be created because no virtual LDEV ID is set for the volume specified as the
P-VOL.
375C
The pair cannot be created because no virtual LDEV ID is set for the volume specified as the
S-VOL.
375D
Paircreate or Pairresync is not available, because the specified journal is dedicated to a Cnt
Ac-J-Cnt Ac-S combination (2DC), and the MU# is 0.
8C13
The pair cannot be created because the specified CTG number is out of range of supporting.
8C19
The pair cannot be created or resynchronized because the specified journal ID is incorrect.
8C1A
The pair cannot be created because the specified journal ID is out of range of supporting.
8C1B
102 Cnt Ac-J troubleshooting