HP XP7 Storage - Manual (Page 60)

NOTE: This setting does not effect master journals unless the RAID Manager horctakeover
command is used to change a master journal into a restore journal.
13. Click Finish.
14. In the Confirm window, review the settings and enter a task name in the Task Name box. To
review additional information about the journal, select the journal and click Detail.
15. Click Apply to save your settings to the system.
Assigning an MP blade to a journal
1. In the Storage System tree, click Replication > Journals.
2. Select the Journals tab, then select the journal you will add the blade to.
3. From the Actions menu, click Journals > Assign MP blade.
4. In the Assign MP Blade window, for MP Blade, select a blade from MPB0 to MPB7.
5. Click Finish.
6. In the Confirm window, review the settings and enter a task name in the Task Name box.
7. Click Apply to save your settings to the system.
60 Cnt Ac-J configuration operations