HP XP7 Storage - Manual (Page 164)

Description Item
Pair’s mirror identifier Mirror ID
Displays the information about the the system connected to the system you accessed. Remote Storage
System box
•
LDEV ID: LDEV identifier and name, which displays when you hover the mouse over it.
•
Port name/Host group ID/LUN ID: System’s port name, host group ID and LUN ID. This
information is useful when specifying an LDEV ID at pair creation. It does not change, even
if you change path settings.
• Emulation type, Capacity: System's volume emulation type and capacity.
•
Journal ID: Journal identifier.
•
Model/Serial number: System’s model, serial number.
Pair Detail
Description Item
The pair’s status Status
Consistency group identifier CTG ID
Indicates that a reverse resync has changed the copy direction. Reverse Resync
Whether pairs are split if an error occurs. Specified during the create pair procedure. Error Level
Cnt Ac-J Z only. Secondary Volume
Written
Whether data can be written (Enabled) or not written (Disabled) to the S-VOL. The pair must be
split for Enabled to display.
If the volume accessed is an S-VOL and can be written to, Enabled/Received or Enabled/Not
Received displays. Indicates whether a write operation is received from the host or not.
Initial copy scheduling order. The range is from 0 to 256 in decimal. Initial Copy Priority
Date and time pair-creation completed. Paired Time
Date and time that the last update was run. Last Update Time
Time used to copy the P-VOL. Pair Copy Time
Time when data consistency is guaranteed. Consistency Time
Cnt Ac-J Z only. Timer Type
Type of clock used for consistency time, specified during journal creation.
Local Storage System •
Virtual storage machine: Virtual storage machine’s model type and serial number.
• Virtual LDEV ID: Volume’s virtual LDEV identifier.
•
Device Name: Volume’s vrtual device name, in the format:
virtual emulation type/number of virtual LUSE volumes/virtual CVS attribute
- Only attributes that are specified display.
- “CVS” displays at the end of the device name, if the virtual CVS attribute is specified.
- A blank indicates no values are specified.
• Virtual SSID: Volume’s virtual SSID. A blank indicates that no virtual SSID is specified.
Remote Storage
System •
Virtual storage machine: Virtual storage machine’s model type and serial number.
• Virtual LDEV ID: Volume’s virtual LDEV identifier.
Cnt Ac-J Z only. CFW
Whether CFW data is copied to the S-VOL; specified during pair creation.
164 Cnt Ac-J GUI reference