HP 3PAR Operating System Software - Manual (Page 145)

b. Verify that for the target system (SystemA):
•
the Status of the target system is ready
•
the Status of primary system’s sending links (SystemA) is Up
•
the SyncStatus of all volumes in the Primary-Rev volume groups is Synced
For example, the showrcopy output on SystemB looks like:
# showrcopy
Remote Copy System Information
Status: Started, Normal
Target Information
Name ID Type Status Options Policy
SystemA 46 FC ready 2FF70002AC000060 mirror_config
SystemC 47 IP ready mirror_config
Link Information
Target Node Address Status Options
SystemA 0:2:1 20210002AC000060 Up
SystemA 1:2:1 21210002AC000060 Up
SystemC 0:4:1 10.100.33.63 Up
SystemC 1:4:1 10.101.33.63 Up
receive 0:2:1 20210002AC000060 Up
receive 1:2:1 21210002AC000060 Up
receive 0:4:1 receive Up
receive 1:4:1 receive Up
Group Information
Name Target Status Role Mode Options
multi.1.r96 SystemA Started Primary-Rev Sync
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 200 testvv.0 100 Synced NA
testvv.1 201 testvv.1 101 Synced NA
testvv.2 202 testvv.2 102 Synced NA
testvv.3 203 testvv.3 103 Synced NA
Name Target Status Role Mode Options
multi.1.r96 SystemC Started Primary-Rev Periodic Last-Sync 2009-06-29 12:32:14 PDT ,
Period 5m, over_per_alert
LocalVV ID RemoteVV ID SyncStatus LastSyncTime
testvv.0 200 testvv.0 300 Synced 2009-06-29 12:32:27 PDT
testvv.1 201 testvv.1 301 Synced 2009-06-29 12:32:28 PDT
testvv.2 202 testvv.2 302 Synced 2009-06-29 12:32:27 PDT
testvv.3 203 testvv.3 303 Synced 2009-06-29 12:32:28 PDT
c. Issue the showrcopy command on the recovered system (SystemA).
d. Verify that:
•
the Status of the target systems (SystemB and SystemC) is ready
•
the Status of all sending links is Up
•
the Role of the synchronizing volume groups is Secondary-Rev
•
the SyncStatus of all volumes in the Secondary-Rev volume groups is Synced
Failing Over to the Synchronous Backup System 145