HP 3PAR Operating System Software - Manual (Page 46)

Figure 18 Example N-to-1 Configuration
Example Remote Copy Pair for N-to-1 Setup
The setup steps for each Remote Copy pair in the N-to-1 configuration refer to the example setup
illustrated in
Figure 19 (page 46) :
Figure 19 Example Remote Copy Pair
Example backup system Example primary system
System2 System1 System name
125 112 System ID
four (only two shown) eight (only two shown) Nodes
2 and 3 6 and 7 Nodes dedicated to Remote Copy
System1 System2 Target system
IP address 172.16.1.11 IP address 172.16.1.12 Links
46 Setting Up N-to-1 Remote Copy