HP 3PAR Operating System Software - Manual (Page 44)

Figure 17 Example Unidirectional 1-to-1 Remote Copy Configuration
Example backup system Example primary system
System2 System1 System name
125 112 System ID
four (only two shown) eight (only two shown) Nodes
2 and 3 6 and 7 Nodes dedicated to Remote Copy
Node 2: IP address 172.16.1.12 Node 6: IP address 172.16.1.11 Links
Node 3: IP address 172.16.2.12 Node 7: IP address 172.16.2.11
System1 System2 Target system
Node 2: 172.16.1.11 Node 6: 172.16.1.12 Target Interface IP
Node 3: 172.16.2.11 Node 7: 172.16.2.12
One secondary virtual volume
(vv1_remote) One virtual volume (vv1)
One primary volume group (Group1)
Virtual volumes and volume groups
One secondary volume group
(Group1.r112)
44 Setting Up 1-to-1 Remote Copy