HP 3PAR Operating System Software - Manual (Page 279)

Press the enter key to stop...
The columns in this example provide the following information:
•
Target . The system name of the actual link process that is running.
•
Node . The node that the link is running on.
•
Address . The IP address of the remote node.
•
IPC. The mode of the Remote Copy link (r) Receive or (s) Send.
•
Total KBytes . The amount of data that has been transmitted since the link was started, in
KB.
•
Throughput(KBs) . The throughput on the link after the last iteration.
•
Current . The amount of current transmitted since the last statrcopy iteration, in KB.
•
Average . The average speed of the data transmission, in KB/s.
NOTES
•
This command repeats until directed to stop.
•
Within the context of this command, KB is 1000 bytes, MB is 1000KB, and GB is 1000MB.
•
The numbers displayed by this command might be somewhat less than those displayed with
statport
, as statrcopy output does not include TCP/IP overhead.
279