HP 3PAR Operating System Software - Manual (Page 47)

Example backup system Example primary system
IP address 172.16.2.11 IP address 172.16.2.12
One secondary virtual volume
(vv1_remote) One virtual volume (vv1)
One primary volume group (Group1)
Virtual volumes and volume groups
One secondary volume group
(Group1.r112)
Verifying Connectivity between Systems
Verify the connectivity for the Remote Copy pair you are configuring.
•
RCIP Remote Copy pairs:
# controlport rcip ping <IP_address> <N:S:P>
•
RCFC Remote Copy pairs:
# showrctransport -rcfc
For more information, see “Verifying the Servers Are Connected” (page 35) .
Setting Up the Primary System
1. Start Remote Copy on the primary storage system (for example, System1).
# startrcopy
Verifying Connectivity between Systems 47