HP Deskjet 6940 User Manual

Page 110

Advertising
background image

1 Remove plastic tape

Consider selecting a higher

print quality

.

Blank pages print

The protective piece of plastic tape might still be attached to the print cartridges.
Verify that the plastic tape has been removed from the print cartridges.

1 Remove plastic tape

The print cartridges might be

out of ink

. Replace one or both empty print cartridges.

The printer might be in direct sunlight. Direct sunlight can adversely affect the

Automatic Paper-Type Sensor

. Move the printer out of direct sunlight.

You might be trying to print a borderless document with only the black print cartridge
installed. When printing a borderless document, always have the tri-color print
cartridge and a black or photo print cartridge installed.

Too much or too little ink appears on the page
If too much or too little ink appears on the page,

follow these instructions

.

Too much or too little ink appears on the page

If too much or too little ink appears on the page, try adjusting the ink volume and dry time
or selecting a different paper type.

Adjust the ink volume and dry time
1.

Open the

Printer Properties

dialog box.

2.

Click the Basics tab, and then click the Advanced features button.
The Advanced features dialog box is displayed.

3.

Move the Ink volume slider toward Light or Heavy.

Chapter 11

108

HP Deskjet 6940 series

Advertising
This manual is related to the following products: