Auto two-sided print, Accessory with small paper tray specifications – HP Deskjet 6940 User Manual
Page 143
Binding margin is in the wrong place
1.
Open the
dialog box.
2.
Click the Finishing tab.
3.
Verify that the following conditions exist:
–
Flip pages up is not selected for binding along the side (book binding).
–
Flip pages up is selected for binding along the top (tablet binding).
For more information, see
.
Only one side of the page prints when the two-sided printing option is enabled
Verify that the following conditions exist:
●
The
are set in both the printer software and the software
program that you are using.
●
The photo paper is not curled, if you are printing on two-sided photo paper. Photo
paper should be flat before printing. See
storing and handling photo paper
for more
information.
●
The media type and size that is selected on the Paper/Quality tab are supported
by the
If the media type or size is not supported by the duplexer, you can print the document
by using the
manual two-sided printing instructions
Note
Do not try to print a two-sided document on single-sided paper, such
as single-sided photo paper.
Colors look faded
If the colors look faded, try printing the two-sided document by using the
Auto Two-Sided Print Accessory with Small Paper Tray specifications
Dimensions when attached to printer
219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep
Duplexing specifications
For duplexing specifications, including skew, media weight, and media sizes for paper
fed into the printer through the printer In tray, see the
.
Small paper tray specifications
Media thickness: 7-12 mils
User's guide
141