HP Deskjet 6940 - Manual (Page 67)

Print
Note If the software program includes an iron-on transfer printing feature, follow
the instructions that are provided with the software program. Otherwise, follow
the instructions below.
1. Open the Printer Properties dialog box.
2. Click the Paper/Quality tab, and then specify the following print settings:
–
Size is: An appropriate paper size
– Source is: Upper tray
– Type is: HP Iron-on Transfer
– Print quality: Normal or Best
3. Click the Basics tab, and then specify the following print setting:
Orientation: Mirror image
Note Some iron-on transfer software programs do not require you to print
a mirror image.
4. Select any other print settings that you want, and then click OK.
Use the What's This? help to learn about the features that appear in the Printer Properties
dialog box.
Banners
Guidelines
●
Remove any perforated strips from the banner paper before loading it in the In tray.
● Do not exceed the In-tray capacity: 20 sheets.
Prepare to print
1.
Verify that the printer is turned on.
2. Remove the Out tray, and then remove all paper from the In tray.
3. Slide the paper width-guide all the way to the left, and then pull out the paper-length
guide.
4. Place the banner paper in the In tray so that the unattached edge is on top of the
paper stack and pointing toward the printer.
User's guide 65