Photo has an unwanted border, Guidelines – HP Deskjet 6940 User Manual

Page 115

Advertising
background image

If fading occurs approximately 25 to 63 mm (1.0 to 2.5 inches) from the edge of a photo,
try the following solutions:

Install a

photo print cartridge

in the printer.

Open the

Printer Properties

dialog box, click the Paper/Quality tab, and then set

the Print quality to Maximum dpi.

Rotate the image 180°.

Photo has an unwanted border

The following conditions can create an unwanted border.

For most paper types

If the photo has an unwanted border, try one of the following solutions:

Align the print cartridges

.

Open the

Printer Properties

dialog box, click the Paper/Quality tab, and then verify

that the selected paper size matches both the paper size that the photo is formatted
for and the size of the paper that is loaded in the In tray.

Verify that no problem exists with the source image. For example, if you are printing
a scanned image, verify that the image was not crooked when it was scanned.

For photo paper with a tear-off tab
If the border appears below the tear-off tab, remove the tab.

User's guide

113

Advertising
This manual is related to the following products: