HP Deskjet 6940 - Manual (Page 128)

Binding margin is in the wrong place
1.
Open the Printer Properties dialog box.
2. Click the Finishing tab.
3. Verify that the following conditions exist:
–
Flip pages up is not selected for binding along the side (book binding).
– Flip pages up is selected for binding along the top (tablet binding).
For more information, see two-sided printing .
Paper size changes when the two-sided printing option is selected
The paper size is not supported by the
duplexer .
Colors look faded
If the colors look faded, try printing the two-sided document by using the
manual two-
sided printing instructions .
Automatic Two-Sided Printing Accessory specifications
Dimensions when attached to printer
124.6 mm (4.9 in) tall x 320.5 mm (12.62 in) wide x 77.7 mm (3.06 in) deep
Skew (second side of printed page)
Plain paper: +/- .009 mm/mm (.009 in/in)
Cards: +/- .006 mm/mm (.006 in/in)
Envelopes: +/- .012 mm/mm (.012 in/in)
Media weight
Letter/A4: 60 to 90 g/m
2 (16 to 24 lb)
Cards: Up to 200 g/m 2 (110 lb index max)
Specialty paper: Up to 160 g/m 2 (44 lb bond)
Media sizes
Size range: 81 x 117 mm to 216 x 297 mm (3.2 x 4.6 in to 8.5 x 11 in)
Paper:
●
U.S. Letter: 216 x 279 (8.5 x 11 in)
● Executive: 184 x 267 mm (7.25 x 10.5 in)
● A4: 210 x 297 mm
● A5: 148 x 210 mm
● B5: 182 x 257 mm
Cards:
●
127 x 203 mm (5 x 8 in)
● 102 x 152 mm (4 x 6 in)
● A6: 105 x 148.5 mm
Chapter 12
126 HP Deskjet 6940 series