HP Deskjet 6940 User Manual
Page 132
Advertising
1 Tilt the fence forward
2 Insert the fence into the appropriate slots
3 Tilt the fence back until it locks into place
Note
To print on legal-sized paper, set the paper-width guide to LTR.
4.
Set the paper-length guide by pulling it until the arrow lines up with the paper size.
1 Align the arrows
Note
To print on legal-sized paper, pull the paper-length guide all the way
out.
Load paper
Follow these steps to load paper:
1.
Remove the lower tray from the base.
2.
all three paper guides are set
to the correct setting.
3.
Insert the paper into the lower tray.
Chapter 12
130
HP Deskjet 6940 series
Advertising
This manual is related to the following products: