Cd/dvd tattoos – HP Deskjet 6940 User Manual
Page 68
1 Unattached edge
5.
Slide the paper-width guide firmly against the paper.
Note
Leave the Out tray off of the printer when printing a banner.
Print
1.
Open the
dialog box.
2.
Click the Paper/Quality tab, and then specify the following print settings:
–
Size is: Letter or A4
–
Source is: Upper tray
–
Type is: HP Banner Paper
3.
Select any other print settings that you want, and then click OK.
Use the
to learn about the features that you see in the Printer
Properties dialog box.
CD/DVD tattoos
Guidelines
●
Refer to the instructions that are included with the media for the most current printing
tips.
●
To avoid damage to the printer, do not feed a sheet of tattoos through the printer
more than once.
●
Separating any part of the tattoo from the protective backing sheet before printing
could harm the printer. Be sure that the tattoo covers the entire backing sheet with
no exposed spaces.
●
Do not use tattoos that are separating from the backing sheet, or that are wrinkled,
curled, or damaged in any way.
●
If the tattoo sheets do not easily feed through the printer, try one of the following
suggestions:
–
Do not load the In tray to capacity.
–
Fan the stack of tattoos.
–
Feed the tattoos one sheet at a time.
Chapter 7
66
HP Deskjet 6940 series