Print a booklet automatically, Tablet binding – HP Deskjet 6940 User Manual

Page 125

Advertising
background image

3.

In the Print on both sides drop-down list, click Automatically.

4.

Select any other print settings that you want, and then click OK.

After the first side of the page is printed, the printer pauses while the ink dries. When the
ink is dry, the paper is pulled back into the duplexer and the reverse side of the page is
printed.

Do not remove the paper from the printer until both sides of the page have been printed.

Tablet binding
Follow these steps to print a two-sided document with a tablet binding:
1.

Open the

Printer Properties

dialog box.

2.

Click the Finishing tab.

3.

Select the Print on both sides check box.

4.

Select the Automatic check box.

5.

Select the Preserve layout check box.

6.

Select the Flip pages up check box.

7.

Select any other print settings that you want, and then click OK.

After the first side of the page is printed, the printer pauses while the ink dries. When the
ink is dry, the paper is pulled back into the duplexer and the reverse side of the page is
printed.
Do not remove the paper from the printer until both sides of the page have been printed.

Print a booklet automatically

To print a booklet automatically, one of the following accessories must be attached to
the printer:

Automatic Two-Sided Printing Accessory

Auto Two-Sided Print Accessory with Small Paper Tray

The two-sided printing accessories only support certain paper types. For a list of
supported paper types, see the specifications for either the

Automatic Two-Sided Printing

Accessory

or the

Auto Two-Sided Print Accessory with Small Paper Tray

.

If a two-sided printing accessory is not attached to the printer or you are printing on an
unsupported paper type, use

manual two-sided printing

.

Guidelines
Do not exceed the In-tray capacity: 150 sheets.

User's guide

123

Advertising
This manual is related to the following products: