HP Deskjet 6940 - Manual (Page 141)

Print
1.
Open the Printer Properties dialog box.
2. Click the Paper/Quality tab, and then specify the following print settings:
–
Size is: The appropriate envelope size
– Type is: The appropriate paper type
– Source is: Rear tray
3. Select any other print settings that you want, and then click OK.
Use the What's This? help to learn about the features that you see in the Printer
Properties dialog box.
Problems with the Auto Two-Sided Print Accessory with Small Paper Tray
Paper jam
Do not clear a paper jam from the front of the printer.
Follow these steps to remove a paper jam from the Auto Two-Sided Print Accessory with
Small Paper Tray:
1.
Turn off the printer.
2. Press the buttons on the left and right sides of the accessory, and then remove it
from the printer.
Warning Remove the Auto Two-Sided Print Accessory with Small Paper
Tray before opening it when clearing a paper jam.
3. Remove any paper that is inside the printer.
4. Lift the back lever on the accessory, and then unhook the Small Paper Tray.
User's guide 139