Automatic paper-type sensor, Quiet mode, Automatic paper-type sensor quiet mode – HP Deskjet 6940 User Manual

Page 19: Auto paper-type sensor, Quiet mode feature

Advertising
background image

Exit ink-backup mode
Install two print cartridges in the printer to exit ink-backup mode.
For instructions about installing a print cartridge, see the

print cartridge installation

page.

Automatic paper-type sensor

The HP automatic paper-type sensor detects the paper in the printer, and then selects
optimal print settings for that media. The result is fewer mouse clicks to start printing,
and automatic optimal print quality on plain, photo, brochure and other high-quality
papers. The sensor also checks the paper width to ensure it matches the size selected
in the printer software. If the widths are different, the printer warns you so that you do
not waste a sheet of paper.
When the auto paper-type sensor is engaged, the printer uses a red optical sensor light
to scan the first page of a document and determine the best paper-type setting and check
paper width. If the paper width is different from the printer software, the printer warns you
and gives you the opportunity to stop printing. If the width matches, the printer determines
the paper-type setting and the page is printed.

Note

The Automatic Paper-Type Sensor is not available for documents that are

printed from the 250-Sheet Plain Paper Tray Accessory or the Auto Two-Sided
Print Accessory with Small Paper Tray.

For more information about using the automatic paper-type setting, see

Select a paper

type

.

Caution

Do not place the printer in direct sunlight. Direct sunlight can interfere

with the auto paper-type sensor.

Quiet mode

Use the Quiet mode feature when you require quieter printing, such as when a baby is
sleeping nearby, or when clients are in the office. To activate Quiet mode, open the

Printer Properties

dialog box, click the Paper/Quality tab, and then click Quiet

Printing. By activating Quiet mode, the speed and sound level of the print job is reduced.
To resume normal printing speed, click Quiet Printing again to clear this feature.
Quiet mode can be used in Normal, Fast Normal, and Draft print modes.

User's guide

17

Advertising
This manual is related to the following products: