Transparencies – HP Deskjet 6940 User Manual
Page 60
Print
1.
Open the
dialog box.
2.
Click the Paper/Quality tab, and then specify the following print settings:
–
Size is: An appropriate card size
–
Type is: Automatic or an appropriate card type
–
Source is: Upper tray
–
Print quality: Normal or Best
3.
Select any other print settings that you want, and then click OK.
Use the
to learn about the features that appear in the Printer Properties
dialog box.
Transparencies
Guidelines
Do not exceed the In tray capacity: 30 transparencies.
Prepare to print
1.
Verify that the printer is turned on.
2.
Raise the Out tray, and then remove all paper from the In tray.
3.
Slide the paper-width guide all the way to the left, and then pull out the paper-length
guide.
4.
Place the transparencies in the In tray.
The side to be printed on should face down and the adhesive strip should face up
and toward the printer.
5.
Carefully push the transparencies into the printer until they stop, so that none of the
adhesive strips catch on one another.
6.
Slide the paper guides firmly against the transparencies.
7.
Lower the Out tray.
Print
1.
Open the
dialog box.
2.
Click the Printing Shortcuts tab.
Chapter 7
58
HP Deskjet 6940 series