HP Deskjet 6940 - Manual (Page 72)

Note Maximum dpi is available on the Paper/Quality tab.
4. Select any other print settings that you want, and then click OK.
Note The print quality options that are available on the Printing Shortcuts tab
vary depending on the type of document that you are printing.
Set the page order
The page order determines the order in which the multipage documents print.
To set the page order, follow these steps:
1. Open the Printer Properties dialog box.
2. Click the Basics tab.
3. Select one of the following options:
–
Front to back: Prints the first page of the document last. This setting saves
time because you do not have to reorder the printed pages. It is the appropriate
setting for most print jobs.
– Back to front: Prints the last page of the document last.
4. Select any other print settings that you want, and then click OK.
Print multiple pages on a single sheet of paper
Use the printer software to print multiple pages of a document on a single sheet of paper.
The printer software automatically resizes the document text and images to fit on the
printed page.
Follow these steps to print multiple pages of a document on a single sheet of paper:
1. Open the Printer Properties dialog box.
2. Click the Finishing tab.
3. In the Pages per sheet drop-down list, click the number of pages that you want to
appear on each sheet of paper.
4. If you want a border to appear around each page image that is printed on the sheet
of paper, select the Print page borders check box.
5. In the Page order is drop-down list, click a layout for each sheet of paper.
6. Select any other print settings that you want, and then click OK.
Print a different first page
If the 250-Sheet Plain Paper Tray Accessory is attached to the
printer, follow the steps to
print a different first page with the 250-
Sheet Plain Paper Tray Accessory .
Chapter 8
70 HP Deskjet 6940 series