Baud rate configuration, Figure 69: baud rate configuration menu – HP Network Storage Router m2402 User Manual
Page 118
Advertising
Serial/Telnet User Interface
124
Network Storage Router M2402 User Guide
Baud Rate Configuration
In the Configuration Menu, select Baud Rate Configuration (1) to change the
baud rate used on the serial port (see
Figure 69: Baud Rate Configuration menu
To change the baud rate enter the number (1 through 5) that represents the desired
rate.
Note:
The asterisk (*) symbol indicates the current setting for the baud rate.
Note:
If the Autobaud feature is being used, it is not necessary to set a baud rate.
Advertising