Figure 82: adding an entry to a fibre channel map – HP Network Storage Router m2402 User Manual
Page 140
Advertising
Serial/Telnet User Interface
146
Network Storage Router M2402 User Guide
Adding a Map Entry to a Fibre Channel Map
To add a new entry to a Fibre Channel map:
1. In the Map Edit Entries screen, select Add (A).
The following screen is displayed:
Figure 82: Adding an Entry to a Fibre Channel map
2. Enter the desired LUN ID.
If the selected LUN is already present in the map, a prompt is displayed that
asks to either confirm the override or enter different address information.
A device selection list is automatically generated.
Note:
Devices cannot be mapped to their native port.
Advertising