Ethernet connections, Figure 25: ethernet port – HP Network Storage Router m2402 User Manual
Page 44
Installation
50
Network Storage Router M2402 User Guide
6. Power on all attached SCSI devices.
7. After all the SCSI devices have completed their individual POST (Power-On
Self-Test) processes, power on the router.
Ethernet Connections
10/100BaseT Ethernet connectivity provides enhanced management and
configuration capabilities. The RJ-45 connector on the router can be directly
connected to a standard 10/100BaseT Ethernet network.
To allow configuration capabilities via this port, the IP network address must be
set. The IP network address can be manually assigned or dynamically assigned
using DHCP. Refer to
for details on setting the IP network
address.
Note:
The router has a unique Ethernet MAC address that is assigned during the
manufacturing process.
Ethernet interfaces include Telnet, FTP, and an HTTP interface known as HP
StorageWorks Visual Manager (VM). For more information on router
management, see
Figure 25: Ethernet port