HP Network Storage Router m2402 - Manual (Page 138)

Serial/Telnet User Interface
144 Network Storage Router M2402 User Guide
Editing the Map Entries of the Current Map
To edit the details of the Current map, in the Map Edit Menu, select Edit Map
Entries (2). This editing screen allows the user to navigate up and down the map
entries and create or remove entries. Device lists are also available to make it
easier to identify the device to be mapped.
Note: Mapping a device to its native port/bus is not allowed. The information needed
to create entries is protocol/port dependent.
Although the options are the same for editing maps of Fibre Channel and SCSI
modules, the screen display differs.
Figure 80 is an example screen display for Fibre Channel maps and Figure 81 is
an example screen display for a SCSI map.
Figure 80: Edit Map Entries for a Fibre Channel map