HP Network Storage Router m2402 - Manual (Page 149)

Serial/Telnet User Interface
155 Network Storage Router M2402 User Guide
Deleting a Host from the Host List
To remove a host from the Host List, select Delete (D). After entering the number
of the host to delete, a confirmation prompt is displayed.
Editing Host information
To change host information, select Edit (E).
Current host information is displayed on the screen. The system will display a
series of prompts, allowing changes to be entered.
Note: To retain the current information for a prompt, press Enter at the prompt.
Figure 91 is an example of editing host information for a Fibre Channel module.
Figure 91: Editing Host information on a Fibre Channel module