HP Network Storage Router m2402 - Manual (Page 90)

Visual Manager User Interface
96 Network Storage Router M2402 User Guide
Viewing and Changing Fibre Channel Host Information
To view or change current host information:
1. In the Mapping Menu screen, select the desired FC module and port.
2. Click Edit/View in the Host section of the screen.
The FC Host Name dialog box is displayed. Current host information is
shown at the top of the dialog box.
3. Enter the new settings and then click Modify.
Figure 51 is an example of the FC Host Name dialog box.
Figure 51: Fibre Channel Host Name dialog box
Fibre Channel Host Name settings:
■ Host Name
■ Host ID (hexadecimal)
■ Port WWN Hi (hexadecimal)
■ Port WWN Lo (hexadecimal)