HP Network Storage Router m2402 - Manual (Page 134)

Serial/Telnet User Interface
140 Network Storage Router M2402 User Guide
Changing to the Next Port or Bus
To scroll to the next Fibre Channel port or SCSI bus, press Enter.
Selecting the Current Map
In the Device Mapping Configuration menu, Select Current Map (1) is used to
select the Current map for each port or bus of a module.
When this option is selected, the Select Current Map screen is displayed. The
current map assignment is displayed at the top of the screen (see
Figure 76 ) .
Figure 76: Select Current map
Caution: If this configuration setting is incorrectly set, processing difficulties
may occur. Before changing this setting, evaluate the need for the change
and verify the desired setting. HP recommends backing up the router
configuration to an external file before making changes to this setting.
To indicate which map is to be the Current map for the module, type the number
that corresponds to the desired map.