HP Network Storage Router m2402 - Manual (Page 121)

Serial/Telnet User Interface
127 Network Storage Router M2402 User Guide
Note: To use the DHCP feature, a DHCP server must be operational on the Ethernet
network. If the DHCP feature is used when there is no DHCP server, DHCP standards
require the router wait three minutes for a response from a DHCP server before timing
out.
■ Change SNMP Settings (8) (SNMP is not supported)
Note: Be sure to correctly set the clock and date in the Real Time Clock configuration
menu so that even logging is accurate.
■ Change Security Settings (9) changes security settings, including the user
name and password.
The default user name is root and the default password is password .
Caution: To ensure security, change the user name and password from the
default settings.
Note: The security settings entered here affect all user interfaces.
User names and passwords should be unique and kept confidential. HP
recommends using a combination of letters and numbers when creating user
names and passwords.