HP Color LaserJet 4500 Printer series - Manual (Page 127)

EN
Chapter 8 127
TONER POSITION
[COLOR] = [STATE] Indicates the current state of a
particular toner cartridge. This
message is displayed when
S ELECT
is pressed while a TONER LOW/
OUT message is displayed.
If necessary, replace the
specified toner cartridge.
TRANSFER KIT LOW
REPLACE KIT The transfer kit is near the end of its
expected life. Continue printing, or replace
the transfer kit.
TRANSFER KIT OUT
REPLACE KIT The transfer kit has reached the end
of its expected life. Replace the transfer kit.
TRAY X EMPTY
[TYPE] [SIZE] The specified tray is empty but the
current job does not need this tray
to complete the job. No action required.
TRAY X LOAD
[TYPE] [SIZE] The specified media type and size
need to be loaded into the
requested tray. Load the specified media type
and size into the requested
tray. Press
G O to override this
request and cause the page to
be printed on different media.
TRAY X OPEN The specified tray is not completely
closed. Close the specified tray.
WARMING UP The printer fuser is heating up.
Printing will continue when the fuser
reaches the proper temperature. No action required.
WASTE TONER FULL
REPLACE DRUM KIT The waste toner receptacle in the
drum kit is full. Replace the drum kit.
Printer Control Panel Messages (continued)
Message Description Recommended Action