HP Color LaserJet 4500 Printer series - Manual (Page 180)

180 PCL Commands
EN
Selecting PCL Fonts
The printer font list provides PCL printer commands for selecting
fonts. (See the section on printing a list of available fonts.) A sample
section of a font list is shown below.
There is one variable box for entering symbol sets and one for
entering point size. Unless these variables are entered, the printer will
use defaults. For example, if you want a symbol set that contains line-
draw characters, select the 10U (PC-8) or 12U (PC-850) symbol set.
Other common symbol set codes are listed in the “Common PCL
Printer Commands” section of this chapter.
Figure B-2 Font List
1 Symbol Set
2 Point Size