HP Color LaserJet 4500 Printer series - Manual (Page 64)

64 Common Printing Tasks
EN
Loading Media into Tray 2
To load media into Tray 2
CAUTION
Do not print cardstock, labels,
envelopes, and unsupported sizes of
media from Tray 2. These media types
should be printed only from Tray 1.
Do not overfill the input tray. Overfilling
trays can cause jams in the printer.
To avoid causing jams, never open the
tray while it is in use.
1 Remove Tray 2 from the printer and
place it on a flat surface.
2 Set the rear media-length guide by
squeezing the guide adjustment
latch and sliding the back of the tray
to the length of media you are
loading.
3 Slide the media-width guides all the
way open by squeezing the release
latch.
4 Load media with the print side facing
down into the tray.
1
3
4
2