HP Color LaserJet 4500 Printer series - Manual (Page 81)

EN
Chapter 4 81
Step 3: Adjust the magenta (M) density setting.
Examine the magenta density bar (M). If the center oval matches the
background pattern more than the other ovals, the magenta density
does not need to be adjusted and you should continue with the next
step. If not, use the following steps to adjust the density:
1 Press I TEM until MAGENTA DENSITY displays.
2 Press the right side of the V ALUE key to increase the value, or
press the left side to decrease it, until the number corresponding
to the oval that most closely matches the background pattern is
displayed.
3 Press S ELECT to save the value. An asterisk (*) displays next to
the selected setting.
Step 4: Adjust the yellow (Y) density setting.
Examine the yellow density bar (Y). If the center oval matches the
background pattern more than the other ovals, the yellow density
does not need to be adjusted and you should continue with the next
step. If not, use the following steps to adjust the density:
1 Press I TEM until YELLOW DENSITY displays.
2 Press the right side of the V ALUE key to increase the value, or
press the left side to decrease it, until the number corresponding
to the oval that most closely matches the background pattern is
displayed.
3 Press S ELECT to save the value. An asterisk (*) displays next to
the selected setting.