HP Color LaserJet 4500 Printer series - Manual (Page 42)

42 Using the Printer Control Panel
EN
To change PowerSave setting
1 Press M ENU until CONFIGURATION MENU displays.
2 Press I TEM until POWERSAVE displays.
3 Press V ALUE until the appropriate setting displays.
4 Press S ELECT to save the setting.
5 Press G O . The printer will return to the READY state within a few
minutes.
If you want to disable PowerSave, select OFF in step 3.
Note This printer qualifies as E NERGY S TAR compliant, as determined by the
U.S. Environmental Protection Agency (EPA).
Switching Printer Personalities
This printer features automatic personality (printer language)
switching. In AUTO mode, the printer automatically detects the type of
print job and configures its personality to accommodate that job. You
also can change the personality mode to either PCL or PostScript
Emulation (PS).
To switch printer personality
1 Press M ENU until CONFIGURATION MENU displays.
2 Press I TEM until PERSONALITY displays.
3 Press V ALUE until the appropriate setting displays.
4 Press S ELECT to save the setting.
5 Press G O to return the printer to the READY state.