HP Color LaserJet 4500 Printer series - Manual (Page 140)

140 Solving Problems with the Printer EN
Clearing Jams in the Middle Front Drawer Area
1 Pull open the middle front drawer to
access jammed media.
Note
When removing the transfer belt
assembly, do not touch the transfer belt
material.
2 Remove the transfer belt assembly
by lifting up on its blue handles.
3 Remove any jammed or torn media.
Be sure to lift the metal flap by its
green tab and remove any jammed
media.
Note
Be sure to inspect the rear area inside
the drawer and remove jammed or torn
media.
4 Reinstall the transfer belt.
5 Close the drawer. The printer will
warm up and return to the READY
state.
Note
If this action does not resolve the
problem, the printer will display an
alternate message.
1
3
4
5
2