HP Color LaserJet 4500 Printer series - Manual (Page 38)

38 Using the Printer Control Panel
EN
Calibration Menu
This printer features automatic, internal calibration to produce
optimum color for most print jobs. The Calibration Menu provides fine-
tuning for critical color-matching requirements.
For information on using this menu for setting toner densities, see
chapter 4.
CAUTION Calibrating toner densities changes the color balance of your printer by
altering halftones. It affects all print jobs. Notify your network
administrator before performing this procedure.
Menu Item Values Description
PRINT
CALIBRATION PAGE Prints out the color calibration
page.
CYAN
DENSITY -5 to +5
(default: 0) Used for increasing or decreasing
cyan toner density.
MAGENTA
DENSITY -5 to +5
(default: 0) Used for increasing or decreasing
magenta toner density.
YELLOW
DENSITY -5 to +5
(default: 0) Used for increasing or decreasing
yellow toner density.
BLACK
DENSITY -5 to +5
(default: 0) Used for increasing or decreasing
black toner density.
RESET DENSITY
VALUES Resets density values back to
default settings. Press
S ELECT to
reset values.