HP OneView - Manual (Page 278)

Table 19 Production networks
VLAN ID Name
1101 prod_1101
1102 prod_1102
1103 prod_1103
1104 prod_1104
Table 20 Development networks
VLAN ID Name
1105 dev_1105
1106 dev_1106
1107 dev_1107
1108 dev_1108
Table 21 Test networks
VLAN ID Name
1111 test_1111
1112 test_1112
1113 test_1113
1114 test_1114
Table 22 Ethernet network configuration values
Notes Value Configuration attribute
Ethernet Type
This is the default value displayed on the Create network screen. Tagged VLAN
This is the default value displayed on the Create network screen. 2.5 Gb/s Preferred bandwidth
This is the default value displayed on the Create network screen. 10 Gb/s Maximum bandwidth
This is the default value displayed on the Create network screen. Selected Smart link
This is the default value displayed on the Create network screen. Not selected Private network
A.3 Planning the configuration
A.3.1 Planning for installation of the appliance
For the sample data center, assume that you make the following choices before and during
installation:
•
You follow the recommendations in the HP OneView Installation Guide , including:
Choosing a physical host for the appliance virtual machine (VM) that is not targeted to
be managed by this appliance ◦
◦ Choosing a static IP address
◦ Ensuring that the ports required by the appliance are available
•
You allow support personnel to access the appliance.
278 Step by step: Configuring an example data center using HP OneView