HP XP P9500 Storage - Manual (Page 127)

RAID Manager GUI Output information Category No.
N Y Relocation priority 11
*You can view this item only in the Auto execution mode.
Display items: Capacity usage for each tier
RAID Manager GUI Output information Category No.
Y Y Capacity for each tier (Total) THP pool 1
Y Y Capacity for each tier (Usage) 2
Y Y Capacity for each tier (Usage) THP V-VOL 3
Display items: Performance monitor statistics
RAID Manager GUI Output information Category No.
N Y
1
Frequency distribution THP pool 1
Y
2
Y
1
Tier range 2
Y Y Performance utilization 3
N Y Monitoring Period starting time 4
N Y Monitoring Period ending time 5
N Y Frequency distribution THP V-VOL 6
N Y Tier range 7
N Y Monitoring Period starting time 8
N Y Monitoring Period ending time 9
Notes:
1. You can select either each level of the tiering policy or the entire pool. If you set other than All(0), the tier range is
not displayed when you select the entire pool.
2. The tier range when the tiering policy All(0) is selected is displayed.
Display items: Operation status of performance monitor/relocation
RAID Manager GUI Output information Category No.
Y Y Monitor operation status: Stopped/Operating THP pool 1
Y Y Performance monitor information:
Valid/Invalid/Calculating 2
Y Y Relocation status: Relocating/Stopped 3
Y Y Relocation progress: 0 to 100% 4
Managing Smart Tiers
Changing pool for Thin Provisioning to pool for Smart Tiers
To change a pool for Thin Provisioning to a pool for Smart Tiers:
1. In the Storage Systems tree on the left pane of the top window, select Pool.
Smart Tiers 127