Deleting a host group – HP XP P9500 Storage User Manual
Page 208
3.
Select the WWNs you want to delete.
4.
Select Delete Login WWNs. The Delete Login WWNs window opens.
5.
In the Confirm window, confirm the settings, in Task Name type a unique name for this task
or accept the default, and then click Apply.
A message appears asking whether to delete it.
If Go to tasks window for status is checked, the Tasks window opens.
6.
Click OK to close the message.
Deleting a host group
Use LUN Manager to delete a host group.
If host group 0 (zero) is deleted, all WWNs that belong to host group 0 are deleted and all LU
paths that correspond to host group 0 are deleted. The host mode of host group 0 becomes
Standard, and the host group name is initialized. To remove all the WWNs and LU paths from
host group 0, you must initialize host group 0. For details, see
“Initializing host group 0” (page 207)
Procedure 33 To delete a host group
1.
Click Ports/Host Groups in the Storage Systems tree.
The list of available ports appear in the tree.
2.
Select the Host Groups tab, or select a port from the tree and then select the Host Groups tab.
3.
Select a host group that you want to delete.
4.
Select Delete Host Groups.
5.
In the Delete Host Groups window, confirm the settings, in Task Name type a unique name
for this task or accept the default, and then click Apply.
If Go to tasks window for status is checked, the Tasks window opens.
6.
Click OK to close the message.
208 Managing logical volumes