HP XP P9500 Storage - Manual (Page 424)

Authentication information (target) list
The list on the right provides user information of the host groups that are allowed to connect to the
port or host group specified in the tree.
Description Item
The names of the host group. Group Name
The user name of the host group. When the user name is not defined for a host group, this
column is blank. User Name
Indicates whether to perform user authentication for the host. Authentication
•
Enable: The host is a target of user authentication.
• Disable: The host is not a target of user authentication.
Authentication information (host) list
Below the User Information (Target) list appears a list that provides user information of the host
selected in the port or host group in the tree. In this list, you can register up to 64 user information
items.
Description Item
The name of the host group. Group Name
The user name of the host. When the user name is not defined for a host, this column is blank. User Name
Indicates the protocol in use for user authentication. Always CHAP. Protocol
Add New User Information (Host) window
Description Item
Select the group name where the user will be registered. Group Name
Specify the user name of the host. Up to 16 alphanumeric characters can be used. User Name
Specify the secret to be used for host authentication. Secret
Use 12 to 32 characters, including alphanumerics, spaces, and the following symbols: . - +
@ _ = : / [ ] , ~
Specify the secret again for confirmation. An error occurs if you enter incorrect characters,
and then click OK. Re-enter Secret
The protocol to be used for user authentication. This protocol is always CHAP
(Challenge-Handshake Authentication Protocol). Protocol
424 LUN Manager GUI reference