HP XP P9500 Storage - Manual (Page 267)

Description Item
You can specify this function only when the V-VOLs that use Smart Tiers or Smart
Tiers Z are available.
Specify Enable or Disable for the performing of the tier relocation. You can
specify this function only when the V-VOLs using Smart Tiers or Smart Tiers Z
are available. Tier Relocation
Specify the relocation priority assigned to the LDEV. You can set this function
under the following conditions: Relocation Priority
•
When there are V-VOLs where Smart Tiers or Smart Tiers Z is enabled.
• When the tier relocation is enabled.
Edit LDEVs Confirm window
Confirm proposed settings, name the task, and then click Apply. The task will be added to the
execution queue.
Description Item
The LDEV identifier, which is the combination of LDKC, CU, and LDEV. LDEV ID
The LDEV name, including the combination of prefix characters and the
initial number. LDEV Name
The parity group identifier. Parity Group ID
The pool name and pool identifier. Pool Name (ID)
The emulation type. Emulation Type
The LDEV capacity. Capacity
Edit LDEVs wizard 267