HP XP P9500 Storage - Manual (Page 385)

Create Host Groups Confirm window
Confirm proposed settings, name the task, and then click Apply. The task will be added to the
execution queue.
Information in this topic assumes only a single task is executed. If multiple tasks are executed, the
window shows all configuration items. To check information of a configuration item, click Back to
return to the configuration window, and then click Help.
Create Host Groups table
Description Item
The identifier of the port. Port ID
The name of the host group. Host Group Name
The host mode of the host group. Host Mode
The attribute of the port indicating I/O flow. Port Attribute
• Initiator: Issues I/O commands to a target port when I/O is executed
between storage systems with Continuous Access Synchronous, and so
on.
•
Target: Receives I/O commands from a host.
•
RCU Target: Receives I/O commands from an initiator when I/O is
executed between storage systems with Continuous Access Synchronous,
and so on.
• External: Issues I/O commands to a target port of an external storage
system with External Storage.
The LUN security setting (enable or disable) on the port. Port Security
The number of hosts registered in the host group. Number of Hosts
The resource group name and identifier of the host group. Resource Group Name (ID)
The details about the selected host group. Detail
Edit Host Groups wizard
Edit Host Groups window
Use this window to edit host group properties for selected host groups. Properties include host
group name, host mode, or host mode options.
Edit Host Groups wizard 385