HP XP P9500 Storage - Manual (Page 36)

LUN Manager
The following table provides information about specific LUN Manager conditions that must be
observed when using Resource Partition.
Condition Operation name
When you specify host groups and open the Add LUN Paths window, the specified
host groups must be assigned to the Storage Administrator group permitted to
manage them. Add LUN paths
When you specify LDEVs and open the Add LUN paths window, the specified
LDEVs must be assigned to the Storage Administrator group permitted to manage
them.
When you specify a host group and open the Delete LUN Paths window, the
specified host group must be assigned to the Storage Administrator group permitted
to manage them. Delete LUN paths
When you specify LDEVs and open the Delete LUN Paths window, the specified
LDEVs must be assigned to the Storage Administrator group permitted to manage
them.
When selecting the Delete all defined LUN paths to above LDEVs check box, the
host groups of all the alternate paths in the LDEV displayed on the Selected LUNs
table must be assigned to the Storage Administrator group permitted to manage
them.
The specified host groups and initiator ports must be assigned to the Storage
Administrator group permitted to manage them. Edit host groups
The specified host groups must be assigned to the Storage Administrator group
permitted to manage them. Add hosts
The specified host group must be assigned to the Storage Administrator group
permitted to manage them. Edit hosts
When you select the Apply same settings to the HBA WWN of all ports check box,
all the host groups where the specified HBA WWNs are registered must be assigned
to the Storage Administrator group permitted to manage them.
When you select the Remove hosts from all host groups containing the hosts in the
storage system check box, all the host groups where the HBA WWNs displayed Remove hosts
in the Selected Hosts table are registered must be assigned to the Storage
Administrator group permitted to manage them.
The specified port must be assigned to the Storage Administrator group permitted
to manage them. Edit ports
If this port attribute is changed from Target or RCU Target to Initiator or to External,
the host group of this port belongs to meta_resource.
Therefore, the host group of this port is not displayed in windows.
The specified host groups and all the LDEVs where the paths are set to the host
groups must be assigned to the Storage Administrator group permitted to manage
them. Create alternative LUN paths
The specified host groups and the LDEVs where the paths are set must be assigned
to the Storage Administrator group permitted to manage them. Copy LUN paths
LDEVs where the specified paths are set must be assigned to the Storage
Administrator group permitted to manage them. Edit command devices
The specified LDEV must be assigned to the Storage Administrator group permitted
to manage them. Edit UUIDs
The specified LDEV must be assigned to the Storage Administrator group permitted
to manage them. Delete UUIDs
36 Configuring resource groups