HP XP P9500 Storage - Manual (Page 398)

If you want to change multiple parameters for a host two or more times, wait until the current task
finishes, and then change the next settings.
If you attempt to change the settings again before the current task finishes, only the setting in the
second task will be applied, so the result might be different from what you expected.
Edit Host window
Description Item
Specify the WWN of the port in 16 digits of hexadecimal numbers. HBA WWN
Specify the host name. Host Name
Host name can be up to 64 single-byte ASCII characters (alpha-numerals
and symbols).
You cannot use the following symbols: \ / : , ; * ? " < > |
You cannot use blanks at the beginning or end of the host name. A host
name is case-sensitive.
If this check box is selected, the changes made in this dialog box will also
affect other ports. Apply same settings to the HBA WWN
in all ports
Edit Host Confirm window
Confirm proposed settings, name the task, and then click Apply. The task will be added to the
execution queue.
398 LUN Manager GUI reference