Resetting an unregistered luse volume, Maintaining luse volumes, Viewing luse volume details – HP XP P9500 Storage User Manual
Page 71
7.
Click OK (or Cancel). The new settings that appear in the window in blue bold italics are LUSE
volumes that have been created but not yet registered to the storage system until you click
Apply. These LUSE volumes can be reset to the state before they were created (see
an unregistered LUSE volume” (page 71)
).
8.
Click Apply, and then click OK.
Resetting an unregistered LUSE volume
When you create a LUSE volume, it is not registered in the storage system until you click Apply.
Until that time, an unregistered LUSE volume appears in blue bold italics, and can be reset to its
initial state before it was created.
This procedure does not recover any LUSE volumes that have been released to the state they were
in when they were first created. Therefore, if the LUSE volume that you have created contains any
LDEVs (those in blue bold italics) that have been released from a different LUSE volume, your LUSE
volume can be reset only to the state when the constituting LDEV was released from that different
LUSE volume.
Procedure 11 To reset an unregistered LUSE volume
1.
In the Remote Web Console main window, click
to change to Modify mode.
2.
In the LUN Expansion window, select a CU number from the LDEV Information tree. The LDEV
Detail table shows all LDEVs in the selected CU.
3.
Select an unregistered LUSE volume (shown in blue bold italics) in the LDEV Detail table.
4.
Right-click the selected LUSE volume, and then select Reset Selected Volume.
5.
In the Reset LUSE Confirmation dialog box, click OK to confirm the LUSE volume reset operation.
The unregistered LUSE volume is reset to the state before it was created, and the LUSE volumes or
the LDEVs constituting the reset LUSE volume appear in the LUN Expansion window in the LDEV
Detail table.
Maintaining LUSE volumes
Viewing LUSE volume details
A LUSE volume is made up of multiple volumes (LDEVs). Use this procedure to view the details of
the individual LDEVs that make up a LUSE volume.
1.
In the Remote Web Console Main window, click Actions > Logical Device > LUN Expansion.
Resetting an unregistered LUSE volume
71