HP LaserJet Print to Mail Accessories - Manual (Page 23)

EN Setting the HP LaserJet Print to Mail accessory 21
Setting fold-stops
1 Remove the fold-chute by pressing the thumb tabs to release the
fold-chute and sliding the fold-chutes out of the chute guides.
2 Squeeze the fold-stop between your thumb and index finger to lift
the locking end of the fold-stop.
3 Slide the fold-stop to the setting you want; settings are visible
through the “window” on the fold-stop.
Note The fold-stop must lock firmly in place at the selected setting.
Figure 10. Setting the fold-stops
Fold-chutes
Fold-stops
Table 2. Software settings
Print to Mail media Step 3, software settings
Letter size 4B
1 Click File, click Print, and then click Properties.
2 Click the Basics tab.
3 Under Orientation, select Portrait and Rotated.
Letter size check 4B
Letter size—extended image 3A
Legal size 2C
Legal size—extended image 1B
Legal size—easy-open 4D 1 Click File, click Print, and then click Properties.
2 Click the Basics tab.
3 Under Orientation, select Portrait and make sure that
Rotated is NOT selected.