HP LaserJet Print to Mail Accessories - Manual (Page 38)

36 4 Troubleshooting and Maintenance EN
3 Open the top cover of the accessory and locate the four rollers
and the jam-clearing knob inside the accessory.
Figure 15. Locating the four rollers
4 Lightly dampen a lint-free cloth with soapy water and wipe clean
the exposed surfaces of the rollers, including the black roller
bands.
5 Keep the cloth and your hands free of the rollers and turn the jam-
clearing knob to expose more of the surfaces of the four rollers.
6 Repeat step 5 until the rollers and black roller bands are clean.
7 Lightly dampen a lint-free cloth with plain water and wipe clean
the exposed surfaces of the four rollers and black roller bands.
8 Allow the rollers and black roller bands to completely air-dry
before proceeding to step 9.
9 Close the cover, replace the fold-chutes and output bin, and plug
in the power cords for both the accessory and the printer to their
power outlets.
Four rollers