HP Officejet 5605 All-in-One Printer - Manual (Page 116)

1 Rollers
2 Separator pad
2. Lightly dampen a clean lint-free cloth with distilled water, then squeeze any
excess liquid from the cloth.
3. Use the damp cloth to wipe any residue off the rollers or separator pad.
4. If the residue does not come off using distilled water, try using isopropyl
(rubbing) alcohol.
5. Close the cover of the automatic document feeder.
Print cartridge troubleshooting
If you are experiencing problems with printing, you might have a problem with one of
the print cartridges.
1.
Remove the print cartridges and check that the protective tape has been
completely removed.
2. Reinsert the print cartridges and verify that they are fully inserted and locked in
place.
3. If the problem persists, print a self-test report to determine if there is a problem
with the print cartridges.
This report provides useful information about your print cartridges, including
status information.
4. If the self-test report shows a problem, clean the print cartridges.
5. If the problem persists, clean the copper-colored contacts of the print cartridges.
6. If you are still experiencing problems with printing, determine which print cartridge
is experiencing the problem and replace it.
For more information on how to print a self-test report and clean the print cartridges,
see
Maintain your HP All-in-One .
Device update
In order to keep your HP All-in-One running smoothly with the most advanced
technology available, you can retrieve device updates for your HP All-in-One from the
HP support website and install them using the
Device Update Wizard . Also, you
User Guide 113
Troubleshooting