HP Officejet 5605 All-in-One Printer User Manual
Page 98
connect to your computer. Otherwise, see
Some of the buttons are missing in the
.
For information on starting the
HP Solution Center
, see the onscreen
HP Image
Zone Help
that came with your software.
●
Open the
Printers
dialog box and check to see that the HP All-in-One is listed.
●
Look in the system tray at the far right of the Windows taskbar for an HP All-in-
One icon. This indicates that the HP All-in-One is ready.
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Solution
If the installation does not run automatically, you can start it manually.
To start the installation from a Windows computer
1.
From the Windows
Start
menu, click
Run
.
2.
In the
Run
dialog box, enter
d:\setup.exe
(if your CD-ROM drive is not
assigned to drive letter D, enter the appropriate drive letter), and then click
OK
.
To start the installation from a Mac
1.
Double-click the CD icon on your desktop to view the contents of the CD.
2.
Double-click the Setup icon.
The minimum system checks screen appears (Windows)
Solution
Your system does not meet the minimum requirements to install the
software. Click
Details
to see what the specific problem is, and then correct the
problem before attempting to install the software.
You can also try installing
HP Image Zone Express
instead.
HP Image Zone
Express
provides less functionality than the
HP Image Zone
software, but it
requires less space and memory on your computer.
For more information about installing the
HP Image Zone Express
software, see
the Setup Guide that came with your HP All-in-One.
A red X appears on the USB connect prompt
Solution
Normally, a green check appears indicating that the plug and play is
successful. A red X indicates that the plug and play failed.
Do the following:
1.
Verify that the control panel faceplate is firmly attached, unplug the HP All-in-
One power cord, and then plug it in again.
2.
Verify that the USB and power cables are plugged in.
User Guide
95
Troubleshooting