HP Officejet 5605 All-in-One Printer User Manual
Page 57
To change the copy settings for the current job only
1.
Press
Copy
repeatedly to display the appropriate menu. The following menus are
available:
–
Number of copies
–
Reduce/Enlarge
–
Copy Quality
–
Copy Paper Size
–
Paper Type
–
Lighter/Darker
–
Enhancements
–
Set New Defaults
2.
Press the until the appropriate setting appears.
3.
Do one of the following:
–
To change more settings, press
Copy
.
This selects the current setting and displays the next menu.
–
To start the copy job, press
Start Color
or
Start Black
.
To save the current settings as defaults for future jobs
1.
Make any needed changes to the settings in the
Copy Menu
.
2.
Press
Copy
repeatedly until
Set New Defaults
appears.
3.
Press until
Yes
appears and then press
OK
.
Explore the onscreen
HP Image Zone Help
to learn how to perform special copy
projects such as enlarging and reducing copies, making multiple copies on a page,
and enhancing the quality of your copies.
Make a 10 x 15 cm (4 x 6 inch) borderless copy of a photo
For the best quality when copying a photo, load photo paper in the input tray and
change your copy settings for the correct paper type and photo enhancement. You
might also want to use the photo print cartridge for superior print quality. With the tri-
color and photo print cartridges installed, you have a six-ink system. See
for more information.
To make a borderless copy of a photo from the control panel
1.
Load 10 x 15 cm (4 x 6 inch) tabbed photo paper in the input tray.
Tip
To make a successful borderless copy, you must have 10 x 15 cm (4
x 6 inch) tabbed photo paper loaded.
For more information on loading photo paper, see
.
2.
Load your original photo print side down on the left front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass, as indicated by the engraved guides along the edge of the
glass.
Chapter 5
54
HP Officejet 5600 All-in-One series
Copy